Replacing Your iPad 10’s USB Port: An Easy, Step-by-Step Guide

If you’ve been having issues with the USB port on your iPad 10, don’t worry! Replacing it can be simpler than you think. Follow these easy steps to get your iPad back up and running quickly.

Step 1: Gather Your Tools and Parts

Before you begin, make sure you have everything you need. You’ll want a small Phillips screwdriver, a plastic opening tool, and, most importantly, a replacement USB port compatible with your iPad 10 model.

Step 2: Power Down Your iPad

First things first, make sure your iPad is completely turned off. This will help prevent any accidents while you’re working on it.

Step 3: Remove the Display

You’ll need to remove the display assembly from your iPad to get started. You can use a heat gun or hairdryer to warm up the device’s edges and then carefully pry the display away from the rear case with your plastic opening tool.

Step 4: Disconnect the Battery

Once the display is removed, you must disconnect the battery to ensure your safety during the repair process. Locate the battery connector on the logic board and gently disconnect it using your plastic opening tool.

Step 5: Take Out the Logic Board

Next, you’ll need to remove the logic board from your iPad. This involves unscrewing the logic board from the rear case and carefully lifting it out.

Step 6: Disconnect the Old USB Port

Now that the logic board is out, you can locate the old USB port assembly and disconnect it from the logic board. Be sure to remove any ribbon cables or connectors attached to it.

Step 7: Install the New USB Port

With the old USB port removed, it’s time to install the new one. Carefully align the latest USB port assembly with the logic board and reconnect any ribbon cables or connectors.

Step 8: Put Your iPad Back Together

Now that the new USB port is in place, it’s time to reassemble your iPad. Reverse the steps you took to take it apart, starting with putting the logic board back in place and reconnecting the battery.

Step 9: Test Everything Out

Once your iPad is back together, please turn it on and test out the new USB port to ensure everything works as it should.


And there you have it! Following these easy steps, you can replace the USB port on your iPad 10 without hassle. If you’re uncomfortable doing it yourself, don’t hesitate to contact a professional repair service like Screen Fixed for assistance.

Leave a Reply

Your email address will not be published. Required fields are marked *